XTB 180
XTB180 anchoring machine has strong bending resistance, high drilling speed and low drilling tool loss. The telescopic square drill arm has a compact structure, strong load-bearing capacity and good shock absorption performance. It has four-wheel drive, strong power and strong climbing ability, and can adapt to harsh road conditions. It can adapt to harsh working conditions such as high temperature difference, high altitude and high dust. It can meet the construction requirements of two types of anchors: pipe seam anchors and grouting anchors. The three-pump system has clear division of labor, anti-interference and stable output flow.
| Project | Unit | Parameters |
|---|---|---|
| Rock Drill (Drilling) | ||
| Brand/Model | / | HC50, Montbey, France |
| Impact Power | kW | 13 |
| Rock Drill (With Rod) | ||
| Brand Model | / | HC25, Montbai, France |
| Impact Power | kW | 8 |
| Anchoring Device | ||
| Anchor Length | mm | 5000 |
| Advancement | mm | 5060 |
| Rotation Angle | ° | ±180 |
| Grouting System | ||
| Grouting Pressure | Mpa | 45387 |
| Output | m³/h | ≥3 |
| Chassis | ||
| Gradeability | / | 14 |
| Walking Speed | km/h | 13 |
| Engine Manufacturer | / | Dongkang |
| Engine Power | kW | 111 |
| Engine Emission Standards | / | National IV |
| Water System | ||
| Rated Displacement | m³/h | 5 |
| Minimum Water Inlet Pressure | bar | 2 |
| Gas System | ||
| Rated Displacement | L/min | 890 |
| Rated Pressure | bar | 8 |
| Electrical System | ||
| Total Installed Power | kW | 74 |
| Voltage/Frequency | V/Hz | 380/50 |
| Cable Length | m | 70 |
| Startup Method | / | Star/Delta |
| Safety Protection System Function | / | Leakage, overload, short circuit protection |